2 Pipe / 4 Pipe Manual Fan Coil Thermostat , Room Temperature Thermostat

Quick Detail:

24/110/220Vac

Surface mounting

On/off control

2pipe / 4pipe

Description:

 Elegant shape with high reliability 
 To control fan coil, valve and damper etc.
 Manual switch to select work state and knob to set the temperature
Thermostats can be directly mounted on the wall or standard wiring box

 HEAT/COOL/OFF selected by switch
 Adjust setpoint by knob
 Speed selected by switch
 LED indicates the working state

Applications:

HL109 series thermostats are designed to control the room temperature in industrial, commercial and

 residential Environment via controlling the fan coil units (with or without motorized valve), damper, diffuser

 etc. which uses NTC to detect the room temperature and compare it with the set-point so as to automatically

 keep the room temperature stable.

Part  No.

Specifications

Power Voltage: 220Vac(or any other volt.) ±10%, 50/60Hz
Setpoint Range:10~30
Setting Unit:1/step
Accuracy:±1
Indication:
LED indicate the working state:
RED shows the power is on;
ORANGE shows under heating or cooling.
System Adjust:
3-position slide switch for system of HEAT,OFF, COOL
3-position slide switch for fan speed of HIGH, MED and LOW
Mode Setting: HEAT,COOL
Fan Speed Selection: High, Medium, Low fan speed control
Cycling Fan Control: Fan cycled running with thermostat
Control Performance: ON/OFF control
Thermostat Output:
SPST relay for 2-pipe and 4-pipe configuration
Electrical Rating:
0.8A run,5A inrush
Temperature Sensor: NTC Thermistor 10K
Enclosure: Fire retardant PC ABS
Minimum Operational Life: Thermostat contacts: 100,000 cycles
Dimensions:86×86×24mm (W×H×D)
Hole Pitch:   60 mm   
Environmental requirements:
Operating temperature range 0 ~ 40
Humidity range 5 ~ 95 %RH (non-condensing)
Mounting: Mounts directly onto wall or wall-box(Mounting screws supplied)
Wiring: Screw-in terminals, each terminal capable of accepting ;16 AWG, 18 AWG, 1.25 mm2 or 0.75 mm2 wires